Cutting Tools—World Markets, End-Users & Competitors: 2005-2010 Analysis & Forecasts. 4 Volume Complete Set

This four volume report analyzes the global market for cutting tools by total consumption value, demand trends, end-user markets, applications and competitors. Products covered include: solid tools and indexable inserts; milling, turning and drilling tools. Grades include carbide, ceramic, cermet, cBN/PcBN, diamond and steel. Products are analyzed by country and end-use markets. Market trends and forecasts are provided for the years 2005-2010.

The report is presented in four volumes and contains over 300 pages and 290 tables and charts of vital information on the cutting tools market.

Each volume is also sold separately. When sold separately, each volume comes with both the Technology Overview and the General Cutting Tools Market Overview as well as specific Volume sections.

VOLUME I: EXECUTIVE SUMMARY
2 Sections • 58 pages • Over 35 Tables and Charts

VOLUME II: GLOBAL CUTTING TOOLS INDUSTRY ANALYSIS BY PRODUCT
3 Sections • Over 105 pages • Over 100 Tables and Charts

VOLUME III: END-USER INDUSTRY ANALYSIS BY COUNTRY
18 Sections • Over 200 pages • Over 215 Tables and Charts

VOLUME IV: COMPETITIVE ANALYSIS OF PRODUCERS
2 Sections • Over 125 pages • Over 50 Producer Profiles

SUMMARY OF REPORT CONTENTS

SCOPE
Tool Types
• Indexable Inserts
• Solid Cutting Tools

Product Types
Milling Tools
• End/Face Milling
• Slotting/Slitting
• Plunge Milling • Contouring
• Profiling • Threading
• Micromachining

Turning Tools
• ISO Turning • Parting/Grooving
• Threading • Profiling • Micromachining

Drilling Tools
• Standard Depth Drilling
• Deep Hole Drilling
• Threading • Micromachining

Other Cutting Tools
(e.g., reamers, burrs, etc.)

Cutting Tool Grades Covered
• Cemented (Tungsten) Carbides
• Cermets
• Ceramics
• cBN/PcBN
• Diamond Tools
• Tool/High-Speed Steel

End-User Industries Covered
• Aerospace
• Automotive
• Chemical Processing
• Communications
• Construction
• Defense/Military
• Electronic
• General Machining
• Medical/Research
• Oil & Gas
• Paper & Pulp Industry
• Power Generation
• Other

Workpiece Materials Covered
• Cast Irons
• Carbon Steels
• Stainless Steels
• High-Temperature/Super Alloys
• Hardened Materials
• Non-Ferrous Metals

Geographic Coverage
Each cutting tools market is specifically broken down by each of the following geographic regions:
• China • United States • Germany
• Japan • Korea • Italy • France
• Taiwan • United Kingdom
• Brazil • Other EU • Other NAFTA
• Other Europe • Other Asia/Pacific
• Other Latin America • Rest of World

Timeframe
• 2004 base year • Forecasts: 2005-2010

VOLUME I: EXECUTIVE SUMMARY

SECTION ONE: TECHNOLOGY OVERVIEW
Global Technological Environment
• International Standards
• ANSI Standards
• ISO (International Standards Organization) Standards
• JIS, AFNOR, BSI, DIN, UNI, SACS and CAM

Product Definitions
• Indexable Inserts
• General Terminology
• Geometry
• Coatings
• Solid Cutting Tools
• Milling Tools by Type
• Turning Tools by Type
• Drilling Tools by Type
• Micromachining Tools
• Other Tools (e.g., reamers, burrs, etc.)

Cutting Tool Selection
• Application Definition
• Specifications
• Workpiece Material Evaluation

Developments in Cutting Tool Grades
• Trends in General Materials Science
• Sintered Tools
• Brazed Tools
• Insert Technology Overview
• General Terminology
• Insert Geometry

Coatings Overview
• Coatings: Changing the Face of Tooling
• Ceramic Coatings
• TiN, TiCN, TiC, TiCN, TiAlN
• Diamond Coatings
• Advances in Coatings Technology
• TiAL Black and gold developments
• Diamond-like-carbon (DLC) Developments
• Nanostructured Materials
• Impact on Tooling and Productivity
• Coatings Processes
• CVD (Chemical Vapor Deposition)
• PVD (Physical Vapor Deposition)
• Developments in Coatings Technology

Advances in General Machining Processes
• Cutting Tool versus Machine Tool Development
• Knowledge Gap: Education on Tool Selection and • Machine Capability
• Consultant Tool Specialists Create Cottage Industry
• Impact of Advances in Cutting Tool Grade Technology
• Adjusting to Ceramic versus Tungsten Carbide Tooling
• Impacts of Advances in Workpiece Material
• Automotive Industry Increases Use of Aluminum
• Aerospace Industry and Hardened Materials
• Developments in Machine Tool Design and Construction
• Quick-Change Tooling
• Multitasking Lathes
• Modular Tooling
• High-Speed Machining
• Coolant Based Machining
• Dry Machining
• Environmental Impact
• Hard Turning
• Powder Metallurgy

Technology Outlook
• Cutting Tool Technology on the Horizon
• Advances in Materials Science Offer Both Challenges and Measurable Productivity Gains
• Nanostructured Materials
• Ultrafine Grain (Micrograin) Carbides
• Ceramics
• Increasing Productivity with New Designs

SECTION TWO: MARKET OVERVIEW
Global Cutting Tools Market Overview Introduction
• Global Industry Trends
• Cutting Tool versus Machine Tool Development
• World Machining Industry by Product Type ($MM): 2005- 2010
• Machine Tools
• Cutting Tools

Machine Tools Industry Overview
• General Trends in Manufacturing
• End-User Strategies in Reducing Cost
• Offsetting Increasing Labor Costs
• Global Demand ($MM) for Machine Tools by Region and Type: 2005-2010
• General Machining
• Milling/Turning
• Screw Machining
• Swiss Style
• Trends in Machine Tool Productivity Designs
• Quick-Changing
• Multitasking Lathe Concept
• Impacts of Just-In-Time Practices
• Economics of Machining
• Economics of High-Speed Machining
• Economic Benefits of Dry Machining
• Impacts of Advances in Workpiece Material
• Productivity and Manufacturing Research
• Super Alloys
• Relevant Legislation
• Waste Removal
• Coolant Use and Disposal
• Work Environment

Coatings Market Overview
• Global Demand ($MM) for Coatings: 2005-2010
• Global Demand ($MM) by Coated versus Uncoated Cutting Tools by Tool Type: 2005-2010
• Global Demand ($MM) by Coating Type: 2005-2010
• Nanostructured Materials Coatings

Cutting Tools Industry Analysis
• Global Demand ($MM) for Cutting Tools by Region: 2005- 2010
• Regional Trends
• Manufacturing Trends

Product Market Overview
• Global Demand ($MM) for Cutting Tools by Type–Solid versus Indexable Tooling: 2005-2010
• Global Demand ($MM) for Cutting Tools by Product Type: Milling, Turning, Drilling & Other: 2005-2010
• Product Trends
• Distribution Channels
• Global Demand ($MM) by Distribution Channel: 2005- 2010
• Global Demand ($MM) for Cutting Tools by Workpiece Material: 2005-2010

Product Grade Overview
• Cutting Tool Grade Trends
• Global Demand ($MM) for Cutting Tools by Grade: 2005- 2010
• Carbide Tools • Ceramic Tools • Cermet Tools
• CBN/PCBN Tools
• Diamond Tools

Advantages of Ceramic Tools
• Solid Ceramic Tools, Alumina
• SiC (silicon carbide), SiN (silicon nitride)
• SiC Whisker Reinforced Tools
• CMC (ceramic matrix composites)

Advanced Tooling
• Cutting Tool Grade Technology
• Brazed Tools
• Micromachined Tools
• Global Demand ($MM) for Micromachined Tools: 2005- 2010
• Advances and Market Growth in Small-Part Machining
• Custom Tool Market

End-User Analysis
• Global Demand ($MM) by End-User: 2005-2010

World Competitive Environment
• Competitive Market Factors
• Supplier Trends and Market Share ($MM)

Industry Trends and Forecasts
• General Conclusions
• High-growth Markets

VOLUME II: GLOBAL CUTTING TOOLS INDUSTRY ANALYSIS BY PRODUCT

SECTION THREE: MILLING
General Market Trends
• Global Demand ($MM) for Milling Tools: 2005-2010
• Global Demand ($MM) by Country: 2005-2010
• Trends by Region

Tool Type: Solid/Indexable
• Milling Tool Market by Tool Type: Indexable versus Solid Global Demand ($MM) for Milling Tools by Tool Type: 2005-2010
• Indexable • Solid
• Trends in Solid versus Indexable Tooling

Milling Tool Market by Product Type
• Global Demand ($MM) for Milling Tools by Product Type: 2005-2010
• End/Face Milling • Slotting/Slitting
• Plunge Milling • Contouring • Profiling
• Threading • Micromachining
• Forecasts & Trends in Product Type

Workpiece Material
• Global Demand ($MM) by Workpiece Material: 2005-2010
• End-User Trends by Workpiece Material

Cutting Tool Grade
• Global Demand ($MM) by Grade: 2005-2010

Industry Trends and Forecasts
• General Conclusions
• High-growth Markets

SECTION FOUR: TURNING TOOLS
General Market Trends
• Global Demand ($MM) for Turning Tools
• Global Demand ($MM) by Country
• Trends by Region

Tool Type: Indexable
• Market by Tool Type: Indexable versus Solid
• Global Demand ($MM) for Turning Tools by Type: 2005- 2010
• Indexable • Solid
• Advances in Insert Design and Application

Turning Tool Market by Product Type
• Global Demand ($MM) for Turning Tools by Type: 2005- 2010
• ISO Turning
• Parting/Grooving
• Threading
• Profiling
• Micromachining
• Forecasts & Trends in Product Type

Workpiece Material
• Global Demand ($MM) by Workpiece Material: 2005-2010
• End-User Trends by Workpiece Material

Cutting Tool Grade
• Global Demand ($MM) by Grade: 2005-2010
• Material Advances Increase Efficiency

Industry Trends and Forecasts
• General Conclusions
• High-growth Markets

SECTION FIVE: DRILLING TOOLS
General Market Trends
• Global Demand ($MM) for Drilling Tools
• Global Demand ($MM) by Country
• Trends by Region

Tool Type: Indexable/Solid
• Market by Product Type: Indexable versus Solid
• Global Demand ($MM) for Drilling Tools by Tool Type: 2005-2010
• Indexable • Solid
• Trends in Indexable Drilling

Drilling Tool Market by Product Type
• Global Demand ($MM) for Drilling Tools by Type: 2005- 2010
• Standard Depth Drilling
• Deep Hole Drilling
• Threading
• Micromachining

Workpiece Material
• Global Demand ($MM) by Workpiece Material: 2005-2010
• End-User Trends by Workpiece Material

Cutting Tool Grade
• Global Demand ($MM) by Grade: 2005-2010

Industry Trends and Forecasts
• General Conclusions
• High-growth Markets

VOLUME III: END-USER INDUSTRY ANALYSIS BY COUNTRY
Sections Three to Eighteen
• Section Three: China
• Section Four: United States
• Section Five: Germany
• Section Six: Japan
• Section Seven: Korea
• Section Eight: Italy
• Section Nine: France
• Section Ten: Taiwan
• Section Eleven: United Kingdom
• Section Twelve: Brazil
• Section Thirteen: Other EU
• Section Fourteen: Other NAFTA
• Section Fifteen: Other Europe
• Section Sixteen: Other Asia/Pacific
• Section Seventeen: Other Latin America
• Section Eighteen: Rest of World

Each Country is Analyzed in Detail by the Following Criteria:
General Market Conditions
• Total Demand by Country for Cutting Tools ($MM): 2005- 2010
• Trends & Forecasts in Cutting Tool Consumption
• Factors Affecting Cutting Tool Demand

Developments in Machining
• Total Demand ($MM) for Machine Tools: 2005-2010
• Trends & Forecasts
• Machine Tool Design and Productivity
• Raw Materials

Key Market Trends by End-User Industry
• Total Demand for Cutting Tools ($MM) by End-User Industry: 2005-2010
• Automotive, electronics, general machining, construction, aerospace, medical/research, communications, oil/gas, chemical processing, pulp & paper industry, defense/military, power generation
• Statistics & Overall Market
• Percentage GDP
• Installed Manufacturing Base
• Growth Levels
• Key Sectors
• Production Capabilities
• Key Producers by Industry
• Government Regulation/Associations

Country Analysis by Tool Type
• Demand ($MM) by Cutting Tool Type: 2005-2010
• Indexable • Solid

Analysis by Product Type
• Demand ($MM) by Cutting Tool Product Type: 2005-2010
• Milling
• Turning
• Drilling
• Other

Competitive Environment
• Competitive Market Factors (e.g., pricing, product development...)
• Marketing Strategies

Industry Trends and Forecasts
• High-growth Markets (CAGR by Year)
• General Conclusions

VOLUME IV: COMPETITIVE ANALYSIS OF PRODUCERS
SECTION THREE: COMPETITIVE ENVIRONMENT
Competitive Environment
• Supplier Sales and Market Share ($MM)
• Competitive Market Factors (e.g., pricing, product development...)
• Marketing Strategies SECTION FOUR: PRODUCER PROFILES

Each profile contains the following categories
• Ownership
• Company Background
• Key Employees
• Total Employees (#)
• Products/Services
• Cutting Tool Revenue ($MM 2003, 2004)
• Distribution Channels
• Key Markets
• Marketing Strategy

Suppliers Profiled
• Advent Tool and Manufacturing, Inc.
• Allegheny Technologies, Inc.
• Allegheny/Firth Sterling
• Allegheny/Landis Threading
• Allegheny/Stellram
• Aloris Tool Technology Co., Inc.
• Asahi Diamond Industrial UK Co. Ltd.
• Balax, Inc.
• Balzers, Inc.
• Bohlerit
• Carbide Processors/Northwest Research Institute
• CeramTec North America
• Ceratizit South Carolina
• Crystallume, Inc.
• CVD Diamond Corp.
• Dapra Corp.
• Dijet Industrial Co., Ltd.
• Greenleaf Corp.
• Guhring, Inc.
• HAM Precision Tools, Inc.
• Hardinge, Inc.
• Ingersoll Cutting Tool, Inc.
• Iscar Metals, Inc. (IMC)
• J & M Diamond Tool, Inc.
• Kennametal
• Kennametal/Rogers Tool Works
• Kieninger GmbH
• Komet of America, Inc.
• Korloy, Inc.
• Kyocera Industries Ceramics/Ceratip
• Kyocera Tycom Corp.
• Landis Gardner
• LMT-FETTE, Inc.
• Mitsubishi Materials USA Corp.
• Morse Cutting Tools
• Nachi-America, Inc
• Newcomer Products, Inc.
• Niagara Cutter (N.C. Industries, Inc.)
• NTK Cutting Tools
• OSG Tap & Die, Inc.
• Paul Horn USA, Inc.
• Sandvik AB
• Schumacher GmbH & Co. KG
• Seco Tools AB
• SGS Tool Co.
• sp3, Inc.
• Sumitomo Electric Industries, Ltd..
• Technodiamant USA, Inc.
• Tungaloy Corporation.
• Valenite, Inc.
• Walter AG

Published April 2005. Over 300 pages. Over 290 tables and charts. Price: $2,195.